| System Requirement |
| System |
Windows Windows7, 98, ME, NT, XP, 2000. Mac OS X (10.4) |
| Access method |
Web Based (HTTP 1.0 / 1.1) |
| Browser Compatibility |
Microsoft IE 6.0 or above, Firefox 2.0 or above |
|
| Status |
| System Status |
System Information |
System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version |
| Current IP Setting |
IP Address, Subnet Mask, Default Gateway, DHCP, DNS. |
| Current Wireless Setting |
Operation mode, Wireless Mode, Channel/ Frequency, L2 Isolation, MSSID Setting |
| Client List |
List current associated clients. Show only authorized and associated clients |
| System Log |
Displays a list of events triggered |
|
| Wireless Functional List |
| Operation mode |
AP |
| WDS |
| Repeater |
| WDS detail |
WDS AP |
| WDS bridge |
| 802.11 mode options |
a/b/g/n |
|
Channel setting
|
Manual |
| Auto / Best Channel Selection |
| Transfer rate setting |
Auto and Manual |
| Output Power Control |
Select by dBm |
| Power Saving |
Wireless LAN power saving |
| Multiple BSSID (Multi AP) |
8 BSSID for 2.4Ghz , another 8BSSID for 5Ghz |
| Each BSSID should has its own WiFi & security settings |
| WPS |
Software only |
| Security |
WEP |
WEP(64/128bit) |
| WPA/ WPA2 |
TKIP / AES |
| MAC address filtering |
MAC address filtering (WLAN, up to 50 field) |
| 802.1x Authenticator |
MD5/ TLS/ TTLS, PEAP |
| LAN Settings |
IP (check validity and DHCP server IP range)
MAC
|
| VLAN |
MSSID |
VLAN tag on MSSID |
| Management VLAN Ethernet Port VID |
Only allow user with specified VID to access the device |
| Tag/ Untag Option |
Independent VLAN setting can be enable or disable |
| Add VLAN tag |
Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID) |
| SNMP |
SNMP V1/V2C |
- SNMP Active : Disabled / Enabled
- SNMP Version : V1/V2c/ALL
- Read Community
- Set Community
- System Location
- System Contract
- Trap Active : Disabled / Enabled
- Trap Manager IP
|
| MIBI, MIBII |
| Private MIB |
| Administration |
User Name (set as “admin”, can be changed by user) |
| Password (c set as “admin”, can be changed by user) |
| Backup/ Restore Setting |
Save Current Setting
Restore Saved Setting
Reset to Factory Default
|
| QoS |
WMM |
| Network Management System |
NMS (EZ Controller) supported |
